To change the temperature of the water press the “Temp” button on the controller. It will either count up to 104 or start counting down. Simply wait a second or two and press the button again and it will go the other way.

If you are like me you won't want to hear the filter running all the time. If you find that it is, you can change the setting: Press "Temp" then "Jets".  Press "Temp" again until "F2" is displayed (Fc will filter continuously). This will adjust the filter time to the lowest setting. If it continues to filter all the time then turn the power off to the tub for a few seconds and turn it back on (small gray breaker box mounted on the garage).

To save energy we keep the hot tub in Economy mode ("Ec"). This means that it only heats during filter cycles. If the hot tub is in standard mode ("St") then it heats any time needed and uses more energy. To check the mode press "Temp" then "Light" and the mode will be displayed. Each time you do this it will cycle through the modes ("St", "Ec" and Sleep (Sl)). Please set to "Ec" before leaving as well.

Please keep the cover on when not in use (especially if you have small children).

If you find that you are not using the Hot Tub please turn it down to 80 Degrees to save energy...thanks.

If you have trouble click Here for the manual.